Hackerspace Vs Makerspace, The War of Words
Bricolagepod
Dominic Morrow speaks with Jo Hinchliffe aka Concretedog, about the etymology of Hackerspace, Makerspace and FabLab
info_outline
Bricolage Podcast Episode: 13 Rob Ives
Bricolagepod
Dominic chats with Rob Ives, paper engineer at the UK Maker Faire in April 2018 about getting started, going full-time, YouTube, teaching and the Guild of Makers.
info_outline
The last UK Maker Faire 2018 Bonus Episode
Bricolagepod
Dominic & Gillian visit the very last UK Maker Faire at the Centre for Life in Newcastle-upon-Tyne in April 2018. They speak with makers as well as with YouTubers Ruth Amos and Colin Furze.
info_outline
Bricolage Podcast Episode: 12 Becky Stern
Bricolagepod
Dominic meets with Becky Stern of Instructables.com and YouTube whilst at Maker Faire in New York. They talk all things making including some tips on how to hoard googly eyes and how Becky’s distraction train derailed and killed a village of Canadians.
info_outline
Bricolage Podcast Episode: 11 Mark Mellors
Bricolagepod
Dominic and Mark chat about the British Maker Scene especially Hackspace, UK Hackspace Foundation, Makevember, the challenges of a Hackspace, EMF Camp projects and how hard it is to get to Robot Wars.
info_outline
Bricolage Podcast Episode: 10 Estefannie Explains It All
Bricolagepod
Dominic chats with You Tuber Estefannie from Estefannie Explains it all. Estefannie is a maker and software engineer. They chatted at the Bay Area Maker Faire in San Mateo California in May 2018.
info_outline
Bricolage Podcast Episode: 09 William Osman
Bricolagepod
Dominic catches up with YouTube star William Osman at the Maker Faire Bay Area in late May 2018.
info_outline
Bricolage Podcast Episode: 08 Jasmine Brackett
Bricolagepod
In this episode Dominic chats with Jasmine about Tindie, Hackaday and Burningman art.
info_outline
Bricolage Podcast Episode: 07 Tanya Fish
Bricolagepod
In this episode Dominic speak to Tanya Fish from Pimoroni about all kinds of stuff to do with eduction and making including #Makevember and PiWars.
info_outline
Bricolage Podcast Episode: 06 Lucy Rogers
Bricolagepod
In this episode Dominic talks to Lucy Rogers better known as Dr-Lucy-Rogers usually said in one breath. She is a fellow of the Institute of Mechanical Engineers.
info_outlineIn my ongoing "hobby" podcast, Bricolage Podcast, I bring you episode number 5 which is (the first?) Tool Autopsy episode with Paul Beech (again).
The basic premiss of this new podcast flavour or segment or... something, is that me and Paul (and maybe other people in the future) go, with a pocket of loose change, to a flea-market (or boot sale or whatever) and buy a few tools. We then do no research and using only our own vague knowledge and intuition we talk about them.
The picture about (is the best picture I have) of the tools we got (don't worry there are more not so good ones later). I suppose this is a sub project of @toolotheday
In this episode:
- your hosts are Dominic Morrow (that's me) and Paul Beech of Pimoroni etc
- We went to the Saturday morning sale at the Cattle Market in Nottingham
- We talk about trugs and gorilla tubs
- We always wear Nitrile or latex gloves (our top tip)
- The first tool TOOL 1 is a bench vice
- TOOL 2 is a S8 ROHM chuck key
- TOOL 3 is two spanners one is 9/16th Inch and the other is HR Tool co DIN 838 spanner 8mm & 9mm
- Dominic mentions his laser work with smokeandmirrors.store
- TOOL 4 counter sink bit
- Paul mentions his Bosch IXO Lithium Iron handheld battery screwdriver
- TOOL 5 Engineers square (remains of)
- Dominic mentions Survivor bias (though says syndrome which isn't the same thing).
- TOOL 6 a pair of screwdrivers one generic with a square handle and the other is Hurwood made in Can by Stanley
- Dominic berates the new Stanley logo
- Dominic mentions Surform planes
- Dominic mentions Stanley tool numbers
- TOOL 7 Plier like carpenters pincer MOD NATA number 0-1836 by Wilkinson Tools
- We talk about the Broad Arrow mark
- Kindly gift of @Biram_Jones the British Army Knife
- Electrolysis for rust removal etc
- The Curious Electric Company, electronics kit company belonging to Matt Little
- Anodising Kit Gateros Plating
- TOOL 8 Shears by Rolcut
- Witness marks
- TOOL 9 Stanley Yankee 131A
- the Mystery Tool (below)
[gallery ids="87958,87957" type="rectangular"]
That's your lot!