loader from loading.io

episode 22: software-development on retro-computers, toaster-disassembly and workshop-equipment usefulness

CBA Podcast

Release Date: 05/11/2018

episode 44: DMX512, ground reference and LED decoration stuff show art episode 44: DMX512, ground reference and LED decoration stuff

CBA Podcast

Hi, and an extremely good 2021 to all of you.

info_outline
episode 43: DMM probes, laundry fix and light-hangout show art episode 43: DMM probes, laundry fix and light-hangout

CBA Podcast

Prepare yourself for epic or less epic talk about a mains test jig that proved very useful, some awesome Probe Master DMM probes well worth the money, and both me and occasional cohost Domen fixing household stuff, and the subtle psychology of starting a repair.

info_outline
episode 42: exploding cap, 3D-printing and planet decoration show art episode 42: exploding cap, 3D-printing and planet decoration

CBA Podcast

The thrilling tale of 4 months of doing pretty much nothing interesting is coming to a podcast near you today!

info_outline
episode 41: oversized test-jig, spiky LED ball and knowing your equipment show art episode 41: oversized test-jig, spiky LED ball and knowing your equipment

CBA Podcast

In this time of global turmoil, the CBA Podcast once again proves to be your one-stop source of distraction and meh-grade information.

info_outline
episode 40: xmas smoothness, deadlifts and resistive load show art episode 40: xmas smoothness, deadlifts and resistive load

CBA Podcast

Welcome to the first and so far best episode of 2020, the third year of this podcast. Thanks for sticking around and making this happen, or alternatively, thanks for just tuning in - hope you like it.

info_outline
episode 39: crossing borders, intensity curves and anti-theft socks show art episode 39: crossing borders, intensity curves and anti-theft socks

CBA Podcast

Another mixed bag as usual. 2 meetups with the CBA Quality Team for some Quality Time.

info_outline
episode 38: LEDstrip fun, rand, and voltage drops show art episode 38: LEDstrip fun, rand, and voltage drops

CBA Podcast

Hi there! Thanks for tuning in (or reading this text and then deciding not to tune in at all). Another episode with a mixed bag of semi-interesting topics.  Thanks for the feedback - the inter-segment jingle will be a bit less loud from now on. Poor ears. We start off by counting pass & fail on this year's new year's resolutions, followed by mentioning a small inline PCB for driving LED-strips and so on. The PCB was used for 2 light effects so far - links to videos of both are given below. Ran into a "gotcha" when dealing with LED-effects: intelligent LEDs stuck in "full brightness"...

info_outline
episode 37: past events, lasercutting and fear of breaking the rope show art episode 37: past events, lasercutting and fear of breaking the rope

CBA Podcast

You thought that we finally learned from our mistakes and abandoned this podcast, and you thought wrong. Once again it's time to lower your standards, and enjoy a new episode of the CBA Podcast. We start with some PCB failures and flaws, followed by a very brief review of the Hackalot lasercutter & vinylcutter workshop. We attended T-DOSE, which is a Dutch open source event hosted in Eindhoven.  Then for something slightly out of the ordinary, we talk about back-of-envelope calculations about whether a climbing-rope can actually break if I fall. (Spoiler alert: it cannot.) Some...

info_outline
episode 36: triple screw-up, LED lamp biopsy and bodyfat measurement show art episode 36: triple screw-up, LED lamp biopsy and bodyfat measurement

CBA Podcast

After more than 1 month of laziness, let's kickstart this episode with some failures and apologies. Next up is a summary of Hackalot's part in the Open Hackerspace Day 2019, and a teardown of a cheap and somewhat boring Aldi 230 Vac LED lamp. Finally, some very-voodoo and somewhat-less-voodoo methods of measuring the percentage of bodyfat in humans are briefly discussed.

info_outline
episode 35: home sensors, disco LED hack and airplanes show art episode 35: home sensors, disco LED hack and airplanes

CBA Podcast

After 5 weeks or so, we're finally back! You'd think that means this episode is filled with 5 weeks worth of exciting techie stuff, but don't get your hopes up yet. Because it's not.

info_outline
 
More Episodes

This episode talks about what happened to my RetroChallenge RC2018/04 project, software-development for yesterday's computers, the last Hackalot-meeting, components with crappy documentation, disassembling a toaster with actual electronics inside, and the usefulness of various engineering-tools found in my workplace.

Links: