episode 27: new TS100-tip, MP3-player innards and controlling a WS2811 LED-strip
Release Date: 08/18/2018
episode 45: glucometer, fuel consumption and vacuum cleaner
CBA Podcast
(Michai is too lazy to make shownotes now, check again later. :-)
info_outline
episode 44: DMX512, ground reference and LED decoration stuff
CBA Podcast
Hi, and an extremely good 2021 to all of you.
info_outline
episode 43: DMM probes, laundry fix and light-hangout
CBA Podcast
Prepare yourself for epic or less epic talk about a mains test jig that proved very useful, some awesome Probe Master DMM probes well worth the money, and both me and occasional cohost Domen fixing household stuff, and the subtle psychology of starting a repair.
info_outline
episode 42: exploding cap, 3D-printing and planet decoration
CBA Podcast
The thrilling tale of 4 months of doing pretty much nothing interesting is coming to a podcast near you today!
info_outline
episode 41: oversized test-jig, spiky LED ball and knowing your equipment
CBA Podcast
In this time of global turmoil, the CBA Podcast once again proves to be your one-stop source of distraction and meh-grade information.
info_outline
episode 40: xmas smoothness, deadlifts and resistive load
CBA Podcast
Welcome to the first and so far best episode of 2020, the third year of this podcast. Thanks for sticking around and making this happen, or alternatively, thanks for just tuning in - hope you like it.
info_outline
episode 39: crossing borders, intensity curves and anti-theft socks
CBA Podcast
Another mixed bag as usual. 2 meetups with the CBA Quality Team for some Quality Time.
info_outline
episode 38: LEDstrip fun, rand, and voltage drops
CBA Podcast
Hi there! Thanks for tuning in (or reading this text and then deciding not to tune in at all). Another episode with a mixed bag of semi-interesting topics. Thanks for the feedback - the inter-segment jingle will be a bit less loud from now on. Poor ears. We start off by counting pass & fail on this year's new year's resolutions, followed by mentioning a small inline PCB for driving LED-strips and so on. The PCB was used for 2 light effects so far - links to videos of both are given below. Ran into a "gotcha" when dealing with LED-effects: intelligent LEDs stuck in "full brightness"...
info_outline
episode 37: past events, lasercutting and fear of breaking the rope
CBA Podcast
You thought that we finally learned from our mistakes and abandoned this podcast, and you thought wrong. Once again it's time to lower your standards, and enjoy a new episode of the CBA Podcast. We start with some PCB failures and flaws, followed by a very brief review of the Hackalot lasercutter & vinylcutter workshop. We attended T-DOSE, which is a Dutch open source event hosted in Eindhoven. Then for something slightly out of the ordinary, we talk about back-of-envelope calculations about whether a climbing-rope can actually break if I fall. (Spoiler alert: it cannot.) Some...
info_outline
episode 36: triple screw-up, LED lamp biopsy and bodyfat measurement
CBA Podcast
After more than 1 month of laziness, let's kickstart this episode with some failures and apologies. Next up is a summary of Hackalot's part in the Open Hackerspace Day 2019, and a teardown of a cheap and somewhat boring Aldi 230 Vac LED lamp. Finally, some very-voodoo and somewhat-less-voodoo methods of measuring the percentage of bodyfat in humans are briefly discussed.
info_outlineRecorded from my cellphone + external mic this time, so feedback w.r.t. sound-quality (or anything else!) is welcome, as usual.
This episode is about getting a new solder-iron tip for the TS100 iron, progress for hand-milling PCB's, a look inside a small MP3-player, and looking at how WS281x works and how to control it.
Links:
- Miniware TS100 soldering iron and included TS-B2 conical tip vs nicer TS-C4 tip
- WS2811 datasheet @ Adafruit
My hacked driver (ATmega164):
