073 - Quick Turn v Slow Turn
The Fuel Pulse Show
In Episode 73 of the Fuel Pulse Show podcast, host Erik Bjornstad tackles a common misconception in fuel storage management: that quick turn fuel systems are immune to microbial contamination. He explains how microbes can flourish in both slow turn (fuel stored for months or years) and quick turn systems (fuel cycled within days or weeks), as contamination resides not just in the fuel but in biofilms on tank surfaces. The episode outlines practical steps to prevent and address microbial growth including regular sampling, biannual testing, water removal, and proper biocide treatment with...
info_outline
072 - Generator Fuel Problems Part 2
The Fuel Pulse Show
Erik Bjornstad continues the discussion on diagnosing generator problems, focusing on when and how to test fuel before accepting a technician's diagnosis that "bad fuel" is causing your generator failures. The episode covers proper fuel testing procedures, sampling techniques, visual inspection clues, and how to interpret lab results to save potentially thousands in unnecessary fuel replacement costs. Erik emphasizes the value of proper diagnostics and consulting with true fuel experts when generator technicians (who often lack fuel expertise) blame fuel quality for system issues. What You'll...
info_outline
071 - Generator Fuel Problems Part 1
The Fuel Pulse Show
This episode explores common generator problems and challenges the automatic assumption that fuel is always to blame. Erik Bjornstad outlines a systematic approach to diagnosing generator issues, presenting four key diagnostic steps: checking fuel filters, examining fuel lines, inspecting valves, and looking for additional filters. The episode emphasizes the importance of proper diagnosis to avoid unnecessary expensive solutions like fuel disposal or part replacement. Special attention is given to detecting microbial contamination through various signs and testing methods. The host stresses...
info_outline
070 - Winter Outlook
The Fuel Pulse Show
In Episode 70 of the Fuel Pulse Show, Erik Bjornstad provides a comprehensive analysis of the upcoming winter weather forecast across different U.S. regions. Following last year's unusually warm winter, meteorologists predict varying conditions: the South and Lower Midwest expect above-average temperatures until February, the Northeast and Upper Midwest anticipate alternating cold and mild periods, while the West faces early snow followed by rain. The forecast is influenced by three major factors: La Niña conditions, Polar Vortex patterns, and warmer-than-usual Gulf and Pacific water...
info_outline
069 - Solid vs. Liquid Biocides
The Fuel Pulse Show
Host Erik Bjornstad discusses solid biocide sticks (also known as bug sticks) and their use in fuel management. While these sticks offer the apparent advantages of easy handling and convenient dosing, they face significant limitations.The episode explores six major problems with solid biocide sticks, including their lack of approval for on-road fuel use, water solubility issues, and potential tank corrosion risks. Bjornstad explains why these limitations make them unsuitable for many non-industrial fuel care scenarios, despite their popularity in specific industrial applications like bulk...
info_outline
068 - Back to School - Interpreting Sample Results
The Fuel Pulse Show
This episode of Fuel Pulse Show focuses on interpreting fuel test results, particularly for stored fuel samples. Host Erik Bjornstad guides listeners through various testing methods, including both ASTM D975 standard tests and predictive tests.The episode covers critical measurements like distillation temperatures, API gravity, cloud point, flashpoint, and cetane index, while also addressing water content and microbial testing. Practical solutions for addressing failing test results are provided, making this a comprehensive guide for fuel maintenance professionals. What You'll Learn: How to...
info_outline
067 - Back to School - Fuel Sampling Part 2
The Fuel Pulse Show
This episode explores proper fuel sampling techniques and locations for different types of fuel testing. Erik Bjornstad explains how contaminants concentrate at tank bottoms, making sampling location crucial for accurate test results. He details specific sampling heights for different tests, introduces the bacon bomb sampler, and provides guidance on sample handling. The episode covers testing for physical properties, microbial contamination, and water content, emphasizing that bottom samples (3-6 inches from bottom) provide the best diagnostic value for comprehensive testing. The discussion...
info_outline
066 - Back to School - Fuel Sampling Part 1
The Fuel Pulse Show
This episode explores proper fuel sampling techniques as part of effective fuel maintenance. Erik Bjornstad discusses the critical aspects of where and how to take fuel samples to ensure accurate testing results. He explains that sample location significantly impacts test outcomes, with different tank depths containing varying levels of contaminants. The episode covers specific sampling depths, proper port selection, and why dead bottom samples should be avoided. Bjornstad emphasizes that sampling technique directly affects the reliability of test results and their representation of the...
info_outline
065 - Back to School - Fuel Polishing
The Fuel Pulse Show
In this episode, Erik Bjornstad explains the comprehensive process of fuel polishing. He covers when to polish fuel based on test results, particularly the ASTM water and sediment test. The episode details two main methods: inline and off-site polishing, with a focus on the sweep, treat, and circulate methodology. Bjornstad provides specific guidance on chemical treatments, filtration systems, and the importance of proper timing and sequence. He emphasizes the need for multiple passes through the filtration system and proper documentation before and after samples. What You'll Learn: How to...
info_outline
064 - Back to School - USLD and Corrosion
The Fuel Pulse Show
In this educational episode, Erik Bjornstad explores the relationship between biodiesel and corrosion in fuel systems. He explains that while pure biodiesel (B100) can have corrosive properties, the common low-percentage blends (B2-B20) used in today's diesel fuel don't pose significant corrosion risks. The episode clarifies that modern fuel systems using materials like stainless steel and aluminum are well-equipped to handle these blends. The real concerns with biodiesel additions center around increased water retention and potential microbe growth, rather than corrosion issues that are more...
info_outlineIn this episode of the Fuel Pulse Show, host Erik Bjornstad delves into the basics of long-term diesel fuel storage. He explains that diesel fuel begins to degrade almost immediately after refining due to unstable molecules and environmental factors like heat, oxygen, water, and microbial contamination.
Bjornstad discusses various tests to assess fuel health, including water and sediment, oxidative stability, and microbial testing. He recommends removing water and biomass, eliminating microbial contamination, and using fuel stabilizers to slow degradation.
The episode emphasizes the importance of early intervention and regular maintenance to extend the life of stored diesel fuel, providing valuable insights for fuel storage management.
What You'll Learn:
- The chemical processes that occur in stored diesel fuel
- Factors that accelerate fuel degradation during storage
- How to assess the health and stability of stored fuel
- Key tests for evaluating fuel condition, including water and sediment, oxidative stability, and microbial tests
- Methods to slow down fuel degradation and extend storage life
- The importance of removing water and biomass from stored fuel
- Why addressing microbial contamination is crucial for fuel stability
- The role of fuel stabilizers in preserving fuel quality
- Best practices for maintaining stored diesel fuel over long periods
- The significance of early intervention in fuel storage management
Ideas Worth Sharing:
Here are three notable quotes from the podcast episode:
- "Heat speeds up all of those chemical reactions linked to degrading the fuel. This kind of process always happens faster in hot weather than cold weather."
- "Using a fuel stabilizer is an essential step to stopping the oxidative and other chemical reactions that, if left unchecked, will result in stored fuel degradation."
- "Even if you could avoid every single one of these, you would still have reactive precursor molecules already in the fuel that would start to attack healthy fuel molecules virtually from day one."
Resources:
Show Notes:
00:00 - Introduction and episode topic
00:59 - What happens when fuel is stored
01:59 - Factors that speed up fuel degradation
03:59 - Ways to assess fuel health and stability
05:59 - Key tests for evaluating stored fuel condition
07:59 - Methods to slow down fuel degradation
09:59 - Conclusion and recap