Fluid Power Forum
Fluid Power Forum host Eric Lanke interviews DJ O’Konek, engineering manager at Nott Company, about a skid steer demonstration project presented at NFPA’s Advanced Hydraulics Conference during the August 2026 iVT Expo. If you want more information, or to check out the graphics referenced, download the NFPA case study . O’Konek describes goals to build a scalable mobile platform for testing new electrohydraulics with minimal system changes, using a fully CAN-based control system and distributed hydraulics. The skid steer uses CAN joysticks and an HMI focused on user experience,...
info_outlineFluid Power Forum
Host Eric Lanke welcomes Paul Johnson, president and founder of Aggressive Hydraulics, to discuss hydraulic cylinders and industry innovation. Johnson shares his background from farm equipment in Minnesota to a University of Wisconsin–Stout degree and roles in hydraulic cylinder testing, design engineering, standards work through NFPA, and continued education and certification. After losing his job amid post-9/11 economic conditions, he helped launch Aggressive Hydraulics in 2002, positioning it as a boutique manufacturer focused on tough, custom hydraulic cylinder applications rather than...
info_outlineFluid Power Forum
Eric Lanke hosts Fluid Power Forum with guest Bruno Dupuis of Famic Technologies, discussing his 2026 Advanced Hydraulics Conference presentation on using Automation Studio CAD and simulation to model off-highway hydraulic circuits and quantify energy efficiency improvements. Dupuis explains building a component-level system model (hydraulics, electrical, and 3D mechanism) and running a repeatable test cycle (lift, rotate 135° CW/CCW, pick and drop load) to compare five case studies: a basic fixed-displacement, pilot-controlled circuit; an electrohydraulic version with joystick control,...
info_outlineFluid Power Forum
Eric Lanke interviews Jon Jensen, National Product Sales Manager for Energy and Safety at SMC Corporation of America, following Jensen’s Automate 2026 presentation on smart and sustainable monitoring for pneumatically driven machines. Jensen describes his background from theater automation using hydraulics and pneumatics to 25+ years at SMC, and outlines SMC’s global industrial automation reach beyond pneumatics. The discussion focuses on why compressed air efficiency now matters for sustainability, how airflow monitoring translates to energy cost and CO2 impact, and why...
info_outlineFluid Power Forum
Fluid Power Forum host Eric Lanke interviews Jeremy Rideout, senior application engineer at Gates Corporation. Gates was a key contributor to the NFPA’s whitepaper, Preventing Leaks in Fluid Power Systems, about a system-level, life-cycle approach to leak prevention. Rideout explains why leaks drive warranty costs, downtime, dissatisfaction, and revenue loss, and emphasizes that leak performance is largely set by early design decisions using the STAMPED requirements framework (Size, Temperature, Application, Material, Pressure, Ends, Delivery). He highlights best practices...
info_outlineFluid Power Forum
At the 2026 iVT Off-Highway Expo, Fluid Power Forum guest host Ben Brown interviews Greg Shtrahman of Marzocchi Pumps about trends at iVT, including hybrid technology, electric drive systems, integration, and sensors, and how they can pair with hydraulic pumps. Shtrahman highlights Marzocchi’s vertically integrated manufacturing of hydraulic gear pumps, gear motors, helical gear pumps, and micro pumps, emphasizing helical technology as a driver for electrification due to low noise (about 40 dB or less), dual compensation, low-RPM high-efficiency performance (90%+ volumetric efficiency), and...
info_outlineFluid Power Forum
At the 2026 iVT Off-Highway Expo, Fluid Power Forum guest host Ben Brown interviews Bruno Dupuis of Famic Technologies about innovations in electro-hydraulic systems and how new components can be modeled in Automation Studio to support digital twins. Dupuis explains that Famic has over 35 years of software development experience and showcases Automation Studio, a CAD and simulation platform for hydraulics, pneumatics, electrical, and automation. The software enables real-time system simulation and analysis of pressures, flows, temperature, voltage, current, and energy consumption for...
info_outlineFluid Power Forum
Host Eric Lanke interviews Jim Diehl and Chris Parisse of Bosch Rexroth about a decentralized hydraulic drive solution showcased in an animatronic dinosaur exhibit at the Da Vinci Science Center in Allentown, Pennsylvania. Replacing an older gear-pump/servo-valve/PLC dinosaur, the new eight-foot “T‑Rexroth” uses four color-coded, interactive axes with visible components and lighting to teach hydraulics while operating quietly, compactly, and with easy maintenance. The system uses a CytroPac hydraulic power unit with variable-speed drive and individual motor-pump groups near each...
info_outlineFluid Power Forum
At the 2026 iVT Off-Highway Expo, guest host Ben Brown interviews Scott Mason of FluiDyne Fluid Power about a busy show and the continued shift toward electrified hydraulics with precise electronic position and feedback control. Mason highlights FluiDyne’s booth display of hydraulic components including piston, vane, and gear pumps, directional control valves, and hydraulic motors. He emphasizes FluiDyne’s ability to respond quickly to customer needs by building required pump configurations from stocked parts, reducing typical 16–20 week lead times to turnaround in days, supported by...
info_outlineFluid Power Forum
At the 2026 iVT Off-Highway Expo, Fluid Power Forum guest host Ben Brown interviews Andy Gray of Scanreco about the show’s value for targeted networking with customers and partners and the growing real-world implementation of AI, machine intelligence, operator interfaces, connectivity, and automation. Gray highlights Scanreco’s radio remote control solutions, including the OneGrip single-handed pistol-grip handheld remote for applications like service cranes and agricultural seed tenders. He also discusses Scanreco’s acquisition of Cross Control and its open software platform,...
info_outlineAt the 2026 iVT Off-Highway Expo, Fluid Power Forum guest host Ben Brown interviews Ken Baker of Bailey International about trends and exhibits at iVT, noting the show’s evolution from electronics toward full systems and a growing presence of hydraulics, valves, and subsystem valve suppliers.
Baker highlights Bailey International’s booth lineup, including standard controls, hydraulic products, and new closed-loop systems, plus an innovative software-driven concept joystick that provides haptic and mechanical feedback without fixed mechanical limits, enabling configurable detents and gearshift-like positions. He explains that advanced feedback can support functional safety by helping operators keep attention outside the cab while still receiving control cues.
Listeners are directed to baileyintl.com and Bailey’s sales and applications teams for technical support.
Connect with our guest host, Ben Brown, at [email protected].
Connect with our guest, Ken Baker, at [email protected].
Learn more about Bailey International at baileyintl.com.
Find and share more interesting fluid power technologies and unique applications using #onlyfluidpowercan and follow podcast and other fluid power industry-related updates at @TheNFPA.