The Hidden Cost of Killing Radiant Load - Short #260
HVAC School - For Techs, By Techs
Release Date: 10/07/2025
Absorption Cooling - The Rise and Fall and Rise - Short #272
HVAC School - For Techs, By Techs
In this short podcast episode, Bryan goes on another history journey, retelling the story of the rise and fall and rise of absorption cooling. Some of the first HVAC/R engineers cooled buildings with fire; they used absorption refrigeration, which ran on heat instead of electricity. In the early 1800s, French scientist Michael Faraday showed that gases like ammonia could absorb heat as they evaporated. Instead of compressing the vapor, engineers looked for a way to absorb the heat from the vapor and drive it back out. In 1859, Ferdinand Carré invented a machine that boiled ammonia,...
info_outline
Combustion Analysis w/ Tony G.
HVAC School - For Techs, By Techs
In this comprehensive training session from the symposium, Tony Gonzalez, Training Director at Fieldpiece, delivers an engaging and practical guide to combustion analysis for HVAC technicians. With 25 years of experience at Fieldpiece—from warehouse worker to training director—Tony brings both technical expertise and real-world application to this 50-minute interactive session focused on the company's CAT 85 combustion analyzer. Tony emphasizes that combustion analysis serves four critical purposes: safety, efficiency, equipment specification verification, and liability protection. He...
info_outline
Give Until it Hertz - The Battle Over Frequency - Short #271
HVAC School - For Techs, By Techs
In this short podcast episode, we go back into the history of the trades, namely the battle over frequency (and how each side had to give until it hertz). The low hum of motors is alternating current: electricity moving back and forth through copper 60x per second (in the USA and Canada, at least). In another version of history, that pulse could be 50x per second instead (as in much of the remainder of the world). The forgotten frequency war is the lesser-known sequel to the war of the currents. Tesla's AC power prevailed over Edison's DC, but different motor and generator companies chose...
info_outline
Residential vs. Commercial HVAC Sales
HVAC School - For Techs, By Techs
In this candid conversation, Nathan and Bryan dive deep into the often-misunderstood world of sales in the construction and HVAC trades. Nathan, who has transitioned from fieldwork to spending roughly 60% of his time in sales, offers a unique perspective on why sales professionals are necessary despite the skepticism they face from tradespeople. The discussion tackles head-on the negative perceptions surrounding salespeople while making a compelling case for their essential role in growing and sustaining a trades business. The conversation explores the fundamental differences between...
info_outline
When Ammonia Ruled the World - Short #270
HVAC School - For Techs, By Techs
In this short podcast episode, Bryan takes us on a history journey back to when ammonia ruled the world. In the mid-1800s, before R-12, many inventors and scientists experimented with vapor-compression refrigeration systems to make ice. They used a variety of refrigerants in their patents, including ether, ethyl ether, carbon dioxide, sulfur dioxide, methyl chloride, and ammonia. Each one had tradeoffs, but ammonia was the favorite because it was inexpensive, very good at moving heat, and useful because its odor made leaks obvious (although it was toxic and irritated the lungs and mucus...
info_outline
Humidity, Airflow, and Refrigeration
HVAC School - For Techs, By Techs
In this episode of the HVAC School podcast, Bryan and Nathan dive deep into the challenges of humidity control in grocery stores and other refrigerated environments. While the conversation takes several entertaining detours (including discussions about morning radio shows, Indian weddings with elephants, and imaginary lava-heated homes), the core content provides valuable insights for HVAC and refrigeration technicians dealing with condensation and moisture issues in commercial refrigeration spaces. The hosts explain why humidity management is critical in grocery environments, where...
info_outline
The Finned-Tube Coil - Short #269
HVAC School - For Techs, By Techs
In this short podcast episode, Bryan explores the history of the finned-tube coil, which is what we use for heat exchange in air-source air conditioners and heat pumps. Air-source HVAC systems have copper tubes threaded through thin metal fins. This design was optimized to ensure the greatest possible surface area for heat exchange to occur. However, prior to the finned-tube coil, HVAC coils looked more like plumbing projects with bare copper loops, which were heavy, costly, and inefficient. In the early 1900s, HVAC was essentially plumbing with higher expectations; capacity was dictated...
info_outline
Are Two Are Better Than One: Understanding Tandem Compressors
HVAC School - For Techs, By Techs
In this comprehensive episode of the HVAC School podcast, host Bryan Orr sits down with three experts from Copeland to demystify tandem and trio compressor systems. Joining him are Gina Kahle (Multiples Engineering Manager with 12+ years at Copeland), Tyler Daniels (Product Management team member), and James Stevenson (Technical Sales veteran with 28 years of field experience). Together, they provide both the engineering perspective and real-world service insights that technicians need to understand these increasingly common systems. The conversation begins with the fundamentals: tandem and...
info_outline
The Tech That Tried to Beat the Compressor - Short #268
HVAC School - For Techs, By Techs
In this short podcast episode, Bryan tells the story of the technology that tried to beat the compressor... and still may someday. We associate cooling with refrigerant... and all the things that come with it, including compressor noise, oil, recovery machines and tanks, leaks, superheat, and regulations. However, there is a means of providing cooling with two pieces of metal and several semiconductors; current runs through it, and one side becomes cold, and the other side becomes hot. This technology is called thermoelectric cooling, associated with the Peltier effect. In 1834, French...
info_outline
VRF, Ductless and Humidity Control w/ Roman
HVAC School - For Techs, By Techs
In this comprehensive episode, Bryan and Roman dive deep into one of the most challenging topics in modern HVAC: making VRF (Variable Refrigerant Flow) and ductless systems perform effectively in humid climates like Florida. The conversation tackles a common misconception that inverter-driven equipment automatically handles humidity well simply because it can "turn down." Roman emphasizes that successful application of VRF technology in humid environments requires skilled professionals who understand building science, envelope integrity, and proper system sizing. The biggest takeaway? If...
info_outlineIn this short podcast, Bryan talks about the hidden cost of killing radiant load, especially when it comes to installing radiant barriers in attics.
We sometimes get service calls about ducts sweating when they never used to sweat. If there are no problems with the system (i.e., the refrigerant charge, static pressure, airflow, supply air temperature, and blower speeds are all good), this type of situation can be a head-scratcher. Ask a customer if they've made any changes to the attic or equipment since the last service call, and there's a great chance they'll say something about adding a radiant barrier to keep the attic cooler.
Ducts pick up heat from the surfaces in the attic. Radiant heat can come from the sun, but visible light isn't required for radiation to happen, and it can occur between objects. A radiant barrier prevents solar heat absorbed by the roof decking from radiating onto attic surfaces, but it doesn't change the dew point. When attic surfaces are cooler and the cool air passes through, the surface temperature drops below the dew point. Condensation happens on the surface; when moisture accumulates, it can lead to other problems, like the dirty M word. Moisture issues happen with low sensible load and high latent load, especially in times like hurricane season in Florida.
Adding heat to a space also makes it drier because it acts as a reheat source and drops the relative humidity. It also adds to the sensible load, leading to longer runtimes (better for comfort but more expensive in terms of energy). When we remove that radiant heat, we increase the risk of condensation and short runtimes. If moisture problems are caused by a radiant barrier, then the barrier will need to come out or the attic will need to be encapsulated and dehumidified.
Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.
Purchase your tickets or learn more about the 7th Annual HVACR Training Symposium at https://hvacrschool.com/symposium.
Subscribe to our podcast on your iPhone or Android.
Subscribe to our YouTube channel.
Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android