HVAC School - For Techs, By Techs
In this action-packed live stream episode of HVAC School, host Bryan is joined by Eric Kaiser, Ty Branaman, and Roman Baugh for a continuation of a deep-dive conversation on vacuum practices — picking up where a previous episode left off with Andrew Greaves and Jim Bergmann. The team sets out to both reinforce the foundational best practices every HVAC technician should follow and to explore some genuinely uncharted scientific territory around how vacuum gauges actually work, how refrigerant contaminates micron gauge readings, and what really happens to moisture inside a system when...
info_outlineHVAC School - For Techs, By Techs
This short podcast is from the Bry-X stage of the 7th Annual HVACR Training Symposium: Cheryl Klein's "Surge Protection for HVAC." Cheryl is with DITEK, a veteran-owned company based in Florida, and has extensive knowledge of whole-home surge protection and HVAC-specific surge protectors. HVAC systems may have their lifespans reduced by power surges (tens of thousands of volts within microseconds) or sustained overvoltage. Surge protectors specifically protect the equipment from power surges, though DITEK manufactures products that help manage sustained overvoltage (and undervoltage, which...
info_outlineHVAC School - For Techs, By Techs
In this special live panel session recorded at the 7th Annual HVAC/R Training Symposium, the three founders of Kalos Services — Bryan Orr, his father Robert (Bob) Orr, and uncle Keith Huntington — sit down together to celebrate the company's 20th anniversary and answer questions from the audience and online attendees. Hosted by Bert, the conversation blends humor, hard-earned wisdom, and surprising candor about what it actually takes to build and sustain a trades business over two decades. From humble beginnings with $100,000 in startup capital to managing multi-million-dollar commercial...
info_outlineHVAC School - For Techs, By Techs
This short podcast episode is Jeremy Begley's Bry-X session from the 7th Annual HVACR Training Symposium: "Permanent Load Reduction in HVAC – The Hidden Driver of Long-Term Sales." Some common customer complaints we hear as HVAC contractors include high humidity, high electric bills, noise, and uncomfortable rooms. The typical HVAC solution is to change the equipment or ductwork, such as by downsizing the unit, adding ancillary dehumidification, or modifying the ductwork. If we can't solve the problem, the customer will ultimately choose a different contractor, no matter how hard we...
info_outlineHVAC School - For Techs, By Techs
In this long-awaited live episode of HVAC School, host Bryan Orr reunites with three industry veterans — Jim Bergmann of measureQuick, Roman Baugh (Kalos), and Andrew Greaves of NAVAC — to tackle one of the most pressing and underaddressed challenges in modern HVAC: performing refrigerant recovery and system evacuation in extreme cold-weather conditions. The conversation was sparked by a real-world observation from technician Chris Hughes, who relocated from Louisiana to Minnesota and quickly discovered just how different — and difficult — cold-climate HVAC work can be. What follows is...
info_outlineHVAC School - For Techs, By Techs
Training the refrigeration technician is about building technicians who think, not just fix. In this engaging conversation from the 7th Annual HVAC/R Training Symposium, host Trevor Matthews sits down with Billy Carlson to explore what it really takes to develop technicians who think critically and troubleshoot effectively. Billy shares his journey in the HVAC/R industry, from residential air conditioning to commercial refrigeration, and ultimately specializing in supermarket rack systems and CO2 refrigeration. With only five years in the grocery sector, his company now dedicates 70-80% of its...
info_outlineHVAC School - For Techs, By Techs
In this special collaborative episode between the Building HVAC Science Podcast and HVAC School, host Bryan Orr sits down with his father and co-founder Robert Orr (Kalos) and Bill and Billy Spohn, the father-son duo behind TruTech Tools, for an in-depth conversation about the realities of running, transitioning, and ultimately passing the torch in a family-owned business. What makes this episode particularly compelling is that both pairs are actively living through their own succession journeys in real time, offering listeners an unusually candid and personal look at the emotional,...
info_outlineHVAC School - For Techs, By Techs
Looking to Add Plumbing To Your HVAC Business? Learn the critical pitfalls to avoid before you make the leap! In this livestream from the 7th Annual HVAC/R Training Symposium, service plumber and third-generation tradesman Nate Agentis breaks down why adding plumbing to your HVAC business isn't as simple as hiring a plumber and stocking PVC on your trucks. What You'll Learn: Why most HVAC companies fail when adding plumbing services The hidden costs beyond just hiring plumbers Marketing challenges specific to emergency plumbing How to structure your plumbing division for success The...
info_outlineHVAC School - For Techs, By Techs
In this episode of the HVAC School Podcast, host Bryan sits down with Johnny, the creator behind the popular social media channel “Let’s Be Techs.” Johnny brings a wealth of hands-on experience to the table, having spent his first 13 years in residential HVAC before transitioning into commercial refrigeration. He shares his unconventional path into the trade—starting out building houses before being recommended to an HVAC contractor—and how the lack of quality mentorship early in his career motivated him to create educational content for technicians. His videos, which began as a fun...
info_outlineHVAC School - For Techs, By Techs
Join Joey Henderson LIVE from the 7th Annual HVAC/R Training Symposium in Florida! This essential training breaks down the science of heat transfer into practical field techniques every technician needs. What You'll Learn: Understanding sensible heat (dry bulb) vs latent heat (wet bulb) removal Why airflow matters Heat transfer diagnostics BEFORE pulling out gauges Gas furnace temperature rise troubleshooting How all about heat relates to cooling, heating, and refrigeration Inverter/cold climate heat pump heat transfer principles Target saturated temperatures Key Takeaways: Industry...
info_outlineIn this episode, recorded live at AHR Expo 2026, Bryan sits down with Louise from UEi Test Instruments for an in-depth conversation about one of the most underestimated dangers in the HVAC trade: carbon monoxide. Rather than treating CO as just another checkmark on a safety list, Bryan and Louise dive into the full history of the gas — all the way back to early publications from 1922 and 1923 that were already studying the effects of low-level CO exposure. One of the most fascinating takeaways from their discussion is just how long the industry has known about the dangers of carbon monoxide, yet how frequently it remains misunderstood, misdiagnosed, and overlooked on the job site.
Louise breaks down the science behind CO poisoning in a way that is both accessible and eye-opening. Unlike high-level acute poisoning — where symptoms are immediately obvious — low-level, chronic carbon monoxide exposure is an entirely different beast. It can mimic the flu, chronic headaches, early-onset Alzheimer’s, and even heart attack symptoms. Because CO is colorless, odorless, and tasteless, it is notoriously difficult to diagnose, and victims often have no idea what is causing their illness. Compounding the problem is the cumulative nature of CO toxicity: the gas builds up in the bloodstream over time and can linger in the body for days, months, or even years after exposure ends. Bryan draws an entertaining but sobering historical connection between the prevalence of carbon monoxide poisoning during the Victorian era — when gas lamps were common inside homes — and the widespread reports of ghost sightings, fugue states, fainting spells, and the spiritualist movement of the time. It was almost certainly CO poisoning, not the paranormal.
The conversation then shifts to practical, on-the-job guidance for technicians and contractors. Bryan and Louise walk through the proper process for combustion analysis: starting your analyzer outside in fresh air, identifying test ports on furnaces, boilers, and water heaters, and understanding what readings at steady state actually mean. They emphasize that CO production is not limited to furnaces alone — ranges, ovens, dryers, fireplaces, water heaters, and even propane-powered forklifts are all legitimate sources. One of the most critical points they make is that carbon monoxide hazards are often intermittent and condition-dependent. A system can appear to be working perfectly during one visit and be producing dangerous levels the next time a door is closed or a vent is accidentally blocked. Visual inspection, awareness of combustion air sourcing, and thoughtful analysis are just as important as having the right instruments.
On the product side, Louise introduces two exciting new offerings from UEI. The first is the UEI Clip, a compact personal CO detector that clips onto a bag, belt, or lanyard, activates automatically at 20 ppm, and is designed as a set-it-and-forget-it safety device with a two-year sealed battery lifespan. Priced under $100, it is an affordable way to outfit an entire team with a baseline layer of personal protection. The second highlight is the new High Accuracy Clamp Meter (HAC), a commemorative product celebrating the United States’ 250th anniversary. This meter excels at wattage measurement — particularly with low-draw ECM blower motors where most meters fall short — and Bluetooth integration with MeasureQuick is on the horizon. Louise also walks through UEI’s revamped combustion analyzer recertification program, UEI Service Plus, which offers same-day turnaround on standard recertifications at their Indianapolis facility, extended warranties with each annual service, and transparent, upfront pricing directly on their website.
Topics Covered
- The history of carbon monoxide research dating back to publications from 1922 and 1923, and a 1923 patent for a hot water heater that sparked a friendly debate between Bryan and Louise about terminology.
- How low-level, chronic CO exposure is underdiagnosed and can mimic conditions like the flu, chronic headaches, early-onset Alzheimer’s, and heart attack symptoms — and why CO builds up cumulatively in the bloodstream.
- The fascinating historical theory connecting widespread Victorian-era reports of ghosts, fugue states, and fainting spells to chronic carbon monoxide poisoning from indoor gas lamps.
- CO safety thresholds: residential standard (9 ppm), World Health Organization guideline (4 ppm), first responder evacuation threshold (35 ppm), and how UL-rated home alarms may not trigger until 70 ppm sustained for 1–4 hours.
- Sources of CO that technicians often overlook, including ovens, ranges, dryers, fireplaces, water heaters, propane forklifts, generators, and vehicles idling near garages.
- Proper combustion analysis procedure: starting the analyzer outside in ambient air, identifying or installing test ports, running tests at steady state, and interpreting O2, CO, and stack temperature readings.
- Industry CO standards for furnaces: official standard (400 ppm), HRI recommendation (200 ppm), industry best practice (100 ppm), and modern high-efficiency benchmarks (50 ppm or less).
- How combustion air sourcing — and changes to it (new roofs, blocked vents, swapped doors) — is one of the most commonly missed risk factors for CO production.
- Why even “heat pump markets” like Florida still need combustion analysis, since over 90% of homes have at least one fuel-fired appliance.
- Introduction of the UEi Clip personal CO detector: set-and-forget, activates at 20 ppm, sealed 2-year battery, priced under $100, and its unexpected popularity among refrigeration technicians.
- Introduction of the UEi High Accuracy Clamp Meter (HAC) commemorative edition: exceptional accuracy at low current draws (ideal for ECM blower motors), full accessory kit included, and upcoming measureQuick Bluetooth integration.
- UEi’s Service+ combustion analyzer recertification program: same-day turnaround at their Indianapolis lab, extended warranty with each annual service, prepaid UPS shipping labels, and transparent pricing on their website.
- A brief spotlight on UEi as a family-owned business founded by Michael Kane’s parents, with their own manufacturing operations in the UK and Korea.
Learn more about UEi's new and longstanding products, as well as the Service+ guarantee, at https://ueitest.com/.
Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.
Purchase your tickets or learn more about the 7th Annual HVACR Training Symposium at https://hvacrschool.com/symposium.
Subscribe to our podcast on your iPhone or Android.
Subscribe to our YouTube channel.
Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.